User Manual Q&AAnswer
Feb 25, 2025 - 10:58 PM
To set up the EKVIP 022521 Inflatable Snowman Family, please follow these steps:
1. Remove the product from the packaging.
2. Spread out the product at the desired location.
3. Ensure that the zip on the bottom of the product is closed.
4. Connect the fan to the transformer.
5. Plug the plug into the mains power supply. The fan will start automatically.
6. Lift up the product slightly to allow it to fill up more quickly with air.
7. Check that the product is stable when fully inflated.
8. Fasten the lines in the eyelets on the side of the product.
9. Attach the lines to the anchoring pins.
10. Secure the anchoring pins in the ground.
11. The product should be disconnected from the mains power supply when deflated. Opening the bottom opening will allow the air to escape more quickly.
12. If desired, a few weights can be placed on the bottom of the product to make it more stable.
Please refer to the provided instruction manual for additional safety instructions and technical details.
Add New Comment