User Manual Q&AAnswer
Feb 25, 2025 - 10:57 PM
To set up and inflate the EKVIP 021644 Inflatable Santa, please follow these steps:
1. Remove the Santa from the packaging.
2. Spread out the Santa in the intended location.
3. Make sure that the zip at the bottom is closed.
4. Connect the fan to the transformer.
5. Plug the plug into the mains power supply. The fan starts automatically.
6. Lift up the Santa slightly so it will inflate quicker.
7. Check that the Santa stands steady when inflated.
8. Secure two lines in the eyes on the sides of the Santa.
9. Attach the lines in the anchoring pins.
10. Secure the anchoring pins in the ground.
Please note that the product must be disconnected from the mains power supply when deflated. Opening the zip at the bottom accelerates deflation.
For further information or any additional questions, please refer to the provided instruction manual.
Add New Comment