How do I assemble and install the EKVIP 022511 Neon Santa? (EKVIP 022511 Neon Santa Instruction Manual)

Answer

manuals.plus

Feb 25, 2025 - 10:49 PM


To assemble and install the EKVIP 022511 Neon Santa, please follow these steps:

1. Carefully unpack the product and ensure that no light sources are damaged.

2. Do not connect the product to a power point while it is still in the pack.

3. Locate a suitable location for the Neon Santa, either indoors or outdoors.

4. Ensure that the rated input voltage of your power supply matches the product's requirement of 230 V ~ 50 Hz.

5. Take the power cord and connect it to a power source.

6. Place the Neon Santa in the desired position, making sure it is secure and stable.

7. Do not subject the power cord or wires to mechanical stress, and do not hang any objects on the product.

8. The Neon Santa is intended for decorative purposes and is not intended to be used as general lighting.

9. Ensure that all seals are fitted correctly before using the string of lights.

10. If any part of the product is damaged, the entire product must be discarded. No parts can be replaced or repaired.

For more detailed instructions and safety information, please refer to the EKVIP 022511 Neon Santa Instruction Manual provided by Jula AB. You can find the latest version of the manual on the Jula website at www.jula.com.

Please note that it is important to follow all safety instructions and guidelines provided in the manual to ensure safe and proper usage of the EKVIP 022511 Neon Santa.