How do I install the batteries in the Pool Blaster LVAC100 Leaf Cordless Vacuum? (POOL BLASTER LVAC100 Battery Powered Vacuum User Manual)

Answer

manuals.plus

Feb 25, 2025 - 10:39 PM

https://manuals.plus/wp-content/uploa... Copy URL to clipboard ATTACHMENT DISPLAY SETTINGS Alignment Center Link To None Size Full Size – 416 × 613 Selected media actions 12 items selected Edit SelectionClear Insert into post " width="186" height="274" />
To install the batteries in the Pool Blaster LVAC100 Leaf Cordless Vacuum, follow these steps:

1. Remove the set of 8 AA batteries that are attached to the underside of the unit.
2. Remove the 2 screws that hold the cover of the battery chamber and carefully remove the battery holder that is attached to the wire terminal connector.
3. Do NOT install Lithium-ion or rechargeable batteries in the battery case.
4. Do not mix old and new batteries. Do not mix Alkaline, Carbon-Zinc, or Ni-Cad batteries.
5. Install batteries into the holder, making sure the battery holder and wire terminal are connected. Orient the battery holder and wire terminal to the right side of the battery compartment.
6. Insert the batteries into the battery chamber, ensuring they are properly aligned.
7. The battery pack must sit deep into the case to avoid damaging leakage during use.

Please refer to the Pool Blaster LVAC100 Battery Powered Leaf Cordless Vacuum User Manual for visual illustrations and additional information on battery installation.

How do I install the batteries in the Pool Blaster LVAC100 Leaf Cordless Vacuum?

1answer

Answer

Share Your Own Experience & Expertise

Browse by Topic

Recently Active Members

Tools