How install LOREX Wall Mount Bracket? (Lorex Wall Mount Bracket User Manual)

Answer

manuals.plus

Feb 25, 2025 - 10:38 PM


To install the LOREX AUL-1W2 and AUL-1B Series Wall Mount Bracket, please follow these steps:

1. Choose a suitable location: Select an area that can support the total weight of the camera and accessories.

2. Mark the mounting holes: Hold the bracket against the desired surface and mark the locations of the mounting holes using a pencil or marker.

3. Drill pilot holes: Using an appropriate drill bit, drill pilot holes at the marked locations. Ensure that the size of the pilot holes matches the size of the mounting screws provided.

4. Attach the bracket: Align the bracket with the pilot holes and secure it to the surface using the provided mounting screws. Make sure the bracket is securely fastened.

5. Mount the camera: Attach the camera to the bracket using the appropriate mounting hardware. Refer to the camera's user manual for specific instructions on how to mount it.

6. Adjust the camera angle: Once the camera is mounted, adjust its angle to the desired position. Use the adjustable arm or bracket to achieve the desired viewing angle.

Please note that this is a general guide, and it is important to refer to the specific instructions provided in the user manual for your particular model of the LOREX AUL-1W2 and AUL-1B Series Wall Mount Bracket for any additional or model-specific installation steps.