User Manual Q&AAnswer
Feb 25, 2025 - 10:20 PM
The Kingwo NT09E CatM1 NB IoT Asset GPS Tracker can be installed using three different methods: Velcro tape, screws, or magnets. Here are the installation steps for each method:
1. Velcro tape:
- Clean the surface of the asset where you want to install the tracker.
- Attach the Velcro tape to the back of the tracker.
- Press the tracker firmly onto the surface of the asset, ensuring it is securely attached.
2. Screws:
- Choose a suitable location on the asset to install the tracker.
- Use a screwdriver to create holes in the asset if necessary.
- Align the holes on the tracker with the holes on the asset.
- Insert screws through the holes and tighten them to securely fix the tracker to the asset.
3. Magnets:
- Clean the metal surface of the asset where you want to install the tracker.
- Remove the protective film from the magnets on the back of the tracker.
- Place the tracker onto the metal surface, ensuring the magnets firmly stick to it.
Please note that it is important to avoid installing the tracker in a metal environment that may interfere with the GPS signal.
For more detailed instructions and illustrations, please refer to the Kingwo NT09E CatM1 NB IoT Asset GPS Tracker User Manual.
Add New Comment