User Manual Q&AAnswer
Feb 25, 2025 - 10:08 PM
To install the Danfoss SVA-140B Inspection kit, please follow these step-by-step instructions:
1. Start by ensuring that the system is depressurized and all power sources are turned off before beginning the installation process.
2. Identify the location where you want to install the inspection kit. It should be easily accessible for maintenance purposes.
3. Remove any existing components or covers that may be obstructing the installation area.
4. Take the SVA-140B Inspection kit and position it in the desired location. Ensure that it is aligned properly and securely mounted.
5. Connect the necessary pipes or hoses to the inspection kit. Refer to the manual for specific instructions on which connections to make and how to properly secure them.
6. Once the connections are made, check for any leaks or loose fittings. Tighten any connections as needed to ensure a secure and leak-free installation.
7. If applicable, connect any electrical wiring required for the inspection kit. Follow the electrical connection guidelines provided in the manual to ensure proper wiring.
8. Double-check all connections, fittings, and wiring to ensure everything is properly installed and secured.
9. Once the installation is complete, you can repressurize the system and restore power.
Please note that these instructions are a general guideline, and it is important to refer to the specific installation guide provided with the Danfoss SVA-140B Inspection kit (Code number 148B6850) for detailed instructions and any additional steps or considerations specific to your installation.
Add New Comment