User Manual Q&AAnswer
Feb 25, 2025 - 09:44 PM
Installation of the Elco 480003 Ellen 230V Ceiling Light should be performed by individuals with the requisite knowledge or by a professional electrician. Before starting the installation, make sure to read and understand the provided installation guide, and hand it over to the user of the system.
Here is a step-by-step guide for installing the Elco 480003 Ellen 230V Ceiling Light:
1. Ensure that the mains power is switched off before starting the installation or performing any maintenance.
2. Choose an appropriate location for the luminaire. Position it away from heat sources and in a well-ventilated area.
3. Follow the instructions provided in the installation guide to properly mount the LED luminaire on the ceiling. Make sure to securely fasten it according to the recommended method.
4. Connect the driver unit to the mains power supply according to the provided instructions. It is important to ensure proper wiring and connections to avoid any electrical hazards.
5. Once the luminaire and driver unit are properly installed and connected, switch on the mains power and test the functionality of the ceiling light.
Please note that the LED in the luminaire is not replaceable, but the control gear can be replaced by a professional if needed.
For more detailed information or specific instructions, you can scan the QR code provided on the product or refer to the complete installation guide provided by Elektro Elco AB. If you have any further questions or concerns, you can contact them directly through the provided contact information: info@elco.se or visit their website at www.llitt.se.
Add New Comment