Answer

Feb 25, 2025 - 09:33 PM
To program a new memory channel on the Wouxun KG-UV9GX, follow these steps:
1. Switch to the FREQ-VFO Display Mode by pressing the TDR|V/M key until "FREQ-VFO" is displayed.
2. Use the Channel xxxx , ▲▼ keys, or 1∼9 keys to select or enter the desired frequency for the new memory channel.
3. Set any other desired parameters for the channel in the Function Menu.
4. Write the frequency to a channel by pressing the MENU key to enter the Function Menu.
5. Use the Channel xxxx , ▲▼ keys, or 1∼9 keys to select the "MEM-CH" function.
6. Press the MENU key again to write the frequency to a memory channel.
7. Enter the desired memory channel number (001∼999) using the keypad and press the MENU key to save the channel.
8. The new memory channel will be displayed in an alternate color to indicate it is unused.
Please refer to the manual for more information and detailed instructions on programming memory channels on the Wouxun KG-UV9GX GMRS Two Way Radio Transceiver and Scanner.
Add New Comment