User Manual Q&AAnswer
Feb 25, 2025 - 09:14 PM
To enable the test functionality on the CONTROL FREAK UBi V2, you need to long press the test button on the front of the device for 4 seconds. This will activate the 10-minute Min/Max test mode. During this mode, the UBi will send out DALI Broadcast RECALL MAX and RECALL MIN commands and a mimic LED on the device will flash at the same rate. To exit this mode, you can either hold the test button for another 4 seconds or power cycle the device. Please note that the test functionality is disabled by default and will return to disabled mode on power cycle.
Add New Comment