User Manual Q&AAnswer
Feb 25, 2025 - 08:40 PM
To charge the BOSCH PKP 3, 6 LI Cordless Hot Glue Gun, follow these steps:
1. Use only the power supplies listed in the technical data. Only these power supplies are matched to the lithium-ion battery of your glue gun.
2. Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the power adaptor. Power adaptors marked with 230 V can also be operated with 220 V.
3. The battery is supplied partially charged. To ensure the full capacity of the battery, completely charge the battery before the first use.
4. Connect the Micro-USB connector of the charging cable to the charging socket on the glue gun and the USB charging connector to the power supply.
5. Plug the mains plug of the power supply into the plug socket.
6. The battery charge indicator will flash green during the charging process. When the charging process is complete, the battery charge indicator will be continuously lit green.
7. Unplug the power supply from the mains. The glue gun cannot be used during the charging process. The lack of function during the charging process does not mean that the tool is defective.
Please refer to the "Battery Charging" section in the instruction manual for more detailed information and safety precautions.
Add New Comment