User Manual Q&AAnswer
Feb 25, 2025 - 07:50 AM
To adjust the speed of the Origo CF-1311 3D Convection Fan, you can use either the control panel on the fan or the remote control. Here are the steps:
1. Control Panel:
- Make sure the fan is plugged into a 220-240V~, 50Hz electrical outlet.
- Press the "POWER" button to turn on the fan. It will start at low speed.
- Press the "SPEED" button to cycle through the different speed levels: Low, Medium, and High. The current speed setting will be displayed on the LED light.
2. Remote Control:
- Ensure that the remote control has a 3V Lithium battery installed correctly.
- Point the remote control towards the fan.
- Press the corresponding "POWER" button on the remote control to turn on the fan.
- Use the "SPEED" button on the remote control to adjust the fan speed to your desired level: Low, Medium, or High.
Please note that the fan should always be unplugged from the power supply before moving or servicing it. Refer to the maintenance section of the instruction manual for more information on cleaning and storage.
Add New Comment