User Manual Q&AAnswer
Feb 25, 2025 - 07:28 AM
To connect the REAL-EL S-2070 2.0 Home Theater Speaker System to your TV, follow these steps:
1. Install the mounting feet provided in the kit for better stability of the speakers.
2. Connect the passive speaker to the active speaker by connecting the speaker cable to the connector.
3. Connect the speaker system to a 230V/50Hz power supply using the built-in power cord.
4. Locate the audio output ports on your TV. These are usually labeled as "Audio Out" or "Line Out."
5. Connect one end of an RCA cable (not included) to the audio output ports of your TV.
6. Connect the other end of the RCA cable to the "AUDIO INPUT" ports on the active speaker. Make sure to match the colors of the RCA connectors (red to red, white to white).
7. Turn on the speaker system using the power switch.
Once connected, you can select the appropriate input mode on the speaker system by pressing the "INPUT" button on the control panel or remote control. Use the remote control to adjust the volume and other settings.
Please refer to the user manual for more detailed instructions and illustrations on connecting and operating the REAL-EL S-2070 2.0 Home Theater Speaker System.
Add New Comment