Answer

Feb 25, 2025 - 06:45 AM
To install the avenli FP14-20-GB Super Clean Filter Pump, follow these steps:
1. Set up your pool and fill it with water according to the pool's installation instructions.
2. Place the filter pump below the pool water, ensuring it is at least 0.2m and not over 1.0m below the water level.
3. Mount the filter pump on a solid and even ground using screws in the mounting holes located in the pump base.
4. Insert the filter cartridge into the filter chamber.
5. Place the filter housing O-ring on the filter chamber.
6. Put the filter housing cover on the filter chamber and finger tighten the filter chamber cover retainer in a clockwise motion.
7. Connect one filter hose to the inlet port of the filter pump (top) and the lower hose connection of the pool. Secure the hose with hose clamps.
8. Turn the air release valve in a counter-clockwise direction 1-2 turns.
9. Connect the second filter hose to the upper hose connection of the pool and the outlet port (bottom) of the filter pump. Secure the hose with hose clamps.
10. Gently finger tighten the air release valve in a clockwise direction.
11. Ensure the pool is filled with water before operating the filter pump.
For more detailed instructions and illustrations, please refer to the avenli FP14-20-GB Super Clean Filter Pump user manual.
Add New Comment