How do I install the TRIO 614300430 Tailor 4x10W Mounted Ceiling Lamp? (TRIO 614300430 4x10W Mounted Ceiling Lamp Installation Guide)

Answer

manuals.plus

Feb 25, 2025 - 06:43 AM

To install the TRIO 614300430 Tailor 4x10W Mounted Ceiling Lamp, please follow these steps:

1. Safety First: Before starting the installation, make sure to read and understand all the safety instructions provided in the manual.

2. Turn Off Power: Ensure that the power supply to the ceiling lamp is turned off at the main electrical panel before proceeding with the installation.

3. Mounting: Choose a suitable location on the ceiling where you want to install the lamp. Ensure that the mounting surface is sturdy and can support the weight of the lamp. Use appropriate screws and anchors to secure the mounting plate to the ceiling.

4. Wiring: Connect the electrical wires from the ceiling to the lamp. The TRIO 614300430 Tailor lamp is designed for a 230V ~ 50Hz power supply. Make sure to match the correct wires (live, neutral, and ground) from the ceiling to the corresponding terminals on the lamp.

5. Lamp Installation: Attach the lamp to the mounting plate by aligning the holes on the lamp with the screws on the mounting plate. Secure the lamp in place using the provided screws.

6. Bulb Installation: The TRIO 614300430 Tailor lamp uses four E27 sockets, with a maximum wattage of 10W per socket. Insert the desired bulbs into the sockets, making sure not to exceed the maximum wattage specified.

7. Power On: Once the lamp is securely installed and the bulbs are in place, turn on the power supply at the main electrical panel. Test the lamp by switching it on and off to ensure it is working correctly.

For more detailed instructions and illustrations, please refer to the TRIO 614300430 Tailor 4x10W Mounted Ceiling Lamp Installation Guide provided with the product.