Answer

Feb 25, 2025 - 06:40 AM
To set up and assemble the pet feeder, follow these steps:
1. Lift the latch: Hold the latch with your index finger and lift it up to open the lid.
2. Place desiccant: Open the desiccant box on the top lid, tear off the transparent wrapping paper of the desiccant bag, place it into the box, and close it.
3. Power supply: Choose either battery power supply or power adapter supply.
- Battery power supply: Remove the battery cover, insert 4 good quality alkaline "D" batteries, and reinstall the battery cover.
- Power adapter supply: Plug in the power adapter and connect the power cable into the L-shaped card slot.
4. Install food bowl: Tilt the base unit back slightly, align the buckle of the food bowl with the base unit to install.
5. Fill pet food: Open the lid, fill the hopper with a suitable quantity of dry food (5-15mm) well in excess of a daily amount.
6. Grain size self-check: Ensure that the dry pet food is within the supported grain size range.
7. Set up your pet feeder: Download the app by scanning the QR code, login or register an account, and follow the instructions to add the device.
8. Set up programmed feeding: Program the feeding schedule in the app to dispense food automatically.
9. Reset your pet feeder: Long press the "Reset" button for 5 seconds until you hear a sound. The link indicator will flash rapidly, and you can try to connect your pet feeder again.
For more detailed instructions and illustrations, refer to the pet feeder's user manual.
Add New Comment