User Manual Q&AAnswer
Feb 25, 2025 - 06:37 AM
To fit a diamond core bit in the BI+ chuck of the HILTI DD 110W Diamond Core Drill, follow these steps:
1. Open the chuck by turning it in the direction of the symbol.
2. From the front, push the diamond core bit into the chuck on the diamond core drilling machine, turning it until the teeth engage.
3. Close the chuck by turning it in the direction of the symbol.
4. Check that the diamond core bit is seated securely in the chuck.
It is important to note that if you are using a BR, BT, M27, or M16 chuck, you will need to prevent rotation of the chuck and use a suitable open-end wrench to remove or fit the core bit.
For more detailed instructions and safety precautions, please refer to the HILTI DD 110W Diamond Core Drill Instruction Manual.
Add New Comment