Answer

Feb 25, 2025 - 06:33 AM
To install the HILTI DD AF-CA Autofeed Unit on the drill stand, follow these steps:
1. Secure the drill stand to the work surface using anchors or a vacuum base plate, ensuring it is held securely.
2. Make sure the supply voltage matches the ratings stated on the type identification plate of the diamond core drilling machine.
3. Connect the drilling feed unit to the diamond core drilling machine recommended by Hilti.
4. Lock the carriage with the carriage lock.
5. Position the drilling feed unit on the carriage, ensuring it is in uniform contact with the carriage.
6. Insert the fastening xxxx through the carriage and into the drilling feed unit.
7. Tighten the securing xxxx by hand.
8. Remove the hand wheel from the carriage.
9. Connect the water hose to the diamond core drilling machine.
10. Connect the water supply to the drilling feed unit.
11. Check the mechanical connection between the drilling feed unit and the carriage.
Please refer to the HILTI DD AF-CA Autofeed Unit Instruction Manual for more detailed instructions and illustrations.
Add New Comment