User Manual Q&AAnswer
Feb 25, 2025 - 06:30 AM
To install the FISHER PAYKEL 25394 Toe Kick for Dual Install 24+18-Inch Column Refrigerator and Freezer, please follow the steps below:
1. Ensure that the refrigerator and freezer units are properly installed and leveled before starting the toe kick installation.
2. Place the toe kick in front of the refrigerator and freezer units, aligning it with the bottom edges of the units.
3. Use the provided screws to attach the toe kick to the units. There should be pre-drilled holes on the bottom of the units for this purpose.
4. Insert the screws through the holes in the toe kick and tighten them securely using a screwdriver or drill.
5. Once the toe kick is securely attached, check for any gaps or unevenness. Adjust the position if necessary to ensure a flush and seamless fit.
6. After installation, clean the toe kick and the surrounding area to remove any dust or debris.
Please note that these instructions are a general guideline and may vary depending on the specific model and installation requirements. It is always recommended to refer to the user manual provided with the product for detailed and model-specific installation instructions.
If you have any further questions or need assistance, please contact Fisher & Paykel's Customer Care Centre at 1.888.936.7872 or visit their website at www.fisherpaykel.com for 24/7 customer support.
Add New Comment