User Manual Q&AAnswer
Feb 25, 2025 - 06:20 AM
To change the flashing modes and color modes of the NightSearcher NS-NSPULSARNAVSTAR Pulsar NavStar Warning Lights, follow these steps:
1. Remove the pulsars from the charging case and place them on the ground. An amber light will appear, and the pulsars will start flashing.
2. Lay the remaining pulsars on the ground, and they will automatically synchronize with the flashing mode of the previous pulsar.
3. Press the round button on any of the pulsars to change between the 6 flashing modes.
4. Press the square button on any of the pulsars to change between the color modes - blue/amber/red.
5. Once you have set up the pulsars to the desired flashing and color mode, place all the pulsars back into the pockets in the carry case. Ensure that the magnet is face down and the cluster of 4 LEDs is face up. The pulsars are held inside the pocket by the magnet. Now they are ready to be charged.
Note: The pulsar lights will not turn off until they are replaced back into the case.
Please refer to the NightSearcher NS-NSPULSARNAVSTAR Pulsar NavStar Warning Lights User Manual for more detailed instructions and illustrations. You can download the manual in multiple languages from the NightSearcher website: https://nightsearcher.co.uk/en/products-manuals.html
Add New Comment