User Manual Q&AAnswer
Feb 25, 2025 - 06:16 AM
To install the HOMCLOUD WL-810WF Radio Frequency PIR Sensor, please follow these steps:
1. Determine the detection range and pet immunity according to the height and angle of the sensor.
2. Open the cover on the back of the sensor and insert two AAA alkaline batteries, making sure to match the correct polarity.
3. Install the bracket by using the provided screws to fix it in place. Align the sensor with the bracket and slide it downwards to secure it.
4. To pair the sensor with the host, ensure the batteries are correctly installed and the LED light on the sensor is on. Set the host to cold matching mode (refer to the host's instruction manual for details).
- Method A: Move at the right front of the sensor.
- Method B: Shake it at the right front of the sensor. The sensor's indicator light will flash, and the host will give a corresponding prompt sound when the match coding is successful.
Please refer to the user manual for more detailed instructions and illustrations on installation, as well as information on the sensor's features and specifications.
Add New Comment