User Manual Q&AAnswer
Feb 25, 2025 - 05:56 AM
To install the FLEXISPOT E7CB Electric Height Adjustable Standing Desk, follow these steps:
Step 1: Install the Side Brackets
- Attach the side brackets (5)(6) to the ends of the supporting beam (4) using screws (A) and the Allen Key (F).
Step 2: Install the Lifting Columns
- Insert the lifting columns (2) into the ends of the supporting beam (4). Fix the lifting columns using screws (D) and the Allen Key (F).
Step 3: Install the Feet
- Place the feet (1) on the bottom of the lifting column (2). Fix the feet using screws (C) and the Allen Key (F).
Step 4: Install the Tabletop
- Follow the instructions provided in the manual to install the tabletop onto the lifting columns.
Step 5: Install the Cable Management Tray
- Rotate the screws (B) incompletely into the supporting beam (4) using the Allen Key (F). Slide one side of the cable management tray (3) into the screws (B), then slide the other side. Finally, tighten the screws (B) with the Allen Key (F).
For more detailed instructions and illustrations, please refer to the FLEXISPOT E7CB Electric Height Adjustable Standing Desk Installation Guide provided with the product.
Note: If you encounter any missing accessories or tools during the installation process, please contact customer service for assistance.
Add New Comment