User Manual Q&AAnswer
Feb 25, 2025 - 05:54 AM
To initialize the Dahua DH-IPC-HUM4001P Pinhole Network Camera, follow these steps:
1. Search for the device that needs to be initialized through the ConfigTool software.
- Double-click ConfigTool.exe to open the tool.
- Click on "Modify IP".
- Select the searching method and click "OK".
2. Select the uninitialized camera(s) and click on "Initialize".
- Choose the device(s) to be initialized.
- Click on "Initialize".
3. Set and confirm the password for the device(s) and enter a valid email address.
- Enter the desired password for the device(s).
- Enter a valid email address.
- Click "Next".
4. Select "Auto-check for updates" if desired and click "OK" to initialize the device(s).
- Choose whether to enable automatic updates.
- Click "OK" to initialize the device(s).
5. Click "Finish" to complete the initialization process.
Please note that these steps are based on the information provided in the Dahua DH-IPC-HUM4001P Pinhole Network Camera User Guide. For more detailed instructions and illustrations, refer to the manual provided with the product.
Add New Comment