User Manual Q&AAnswer
Feb 25, 2025 - 05:50 AM
To adjust the height of the saddle on the KAYOBA 022234 Children's bicycle, follow these steps:
1. Locate the clamping xxxx that holds the saddle post to the saddle tube.
2. Loosen the clamping xxxx to release the saddle post.
3. Set the saddle post to the desired height.
4. Tighten the clamping xxxx to secure the saddle post in place.
5. Check that the saddle post is securely fastened by trying to turn the saddle by hand. It should not be possible to turn the saddle.
Note: The saddle post should be lower than the marking for the top position. It should not be possible to see the marking for the top position. Tighten the saddle post clamping xxxx and nut to 30 Nm using a 6 mm hex key or 13 mm hex spanner.
Remember to adjust the saddle height so that when one of the pedals is in its lowest position, your child's heel just reaches down to the pedal with the leg stretched out. When cycling with the sole of the foot on the pedal, the leg should be slightly bent when the pedal is in its lowest position.
Always refer to the user manual for detailed instructions and safety guidelines.
Add New Comment