User Manual Q&AAnswer
Feb 25, 2025 - 05:46 AM
To add the EVA LOGIK ZW38S Z-Wave Mini Plug in Socket to your Z-Wave network, follow these steps:
1. Make sure your Z-Wave certified controller is ready to add a device to the network.
2. Press the Manual/Program button on the smart plug three times quickly. The blue LED on the plug will blink quickly.
3. If your Z-Wave certified controller features remote access, you can now control the plug from your mobile devices.
4. If you have issues with pairing or including the device, move it as close as possible to the hub and try again. You can move it to the desired location once it is successfully added to the network.
Note: If the manual button doesn't light up after being pressed three times, you can reset the device by clicking the button twice quickly and then holding it for at least 10 seconds. This operation can be done when manual control is functional, and a single press can turn the lamp on or off.
For more detailed instructions and troubleshooting, please refer to the user manual provided with the product.
Add New Comment