User Manual Q&AAnswer
Feb 25, 2025 - 05:41 AM
To fold and unfold the Meister WU8985530, WU8985540 Folding Transportation Cart, please follow these steps:
1. Place the cart upside down on a soft surface.
2. Mount the four castors (A) using the provided screws (C) under the front edge of the cart.
3. Mount the brake castors under the rear edge below the handle (F).
4. Fix the belt eyes (D) with one xxxx each (E) to the underside of the cart.
5. Turn the cart over and stand it on its castors.
6. Press the securing bar (G) down with your foot and fold the handle (F) up until it clicks audibly into place. This locks the handle in the upright position.
7. To fold the handle down again, press the securing bar again and gently lower the handle until it is parallel to the cart.
8. To open the small tem carry bag (H), use the press stud located on it.
Please note the following safety notes:
- Do not overload the cart. Observe the loading weight detailed on the type plate.
- Stack the load as flat as possible.
- Only move the cart when the handle is secured.
- Always activate both brake castors when parking the cart.
- Avoid taking curves quickly.
- Secure the load with suitable straps.
- Do not transport people.
- Keep the cart away from children and store it out of their reach.
For further assistance or more detailed instructions, you can refer to the provided manual or contact ConmetalI Meister GmbH directly.
Add New Comment