User Manual Q&AAnswer
Feb 25, 2025 - 05:35 AM
After spraying pesticides, it is important to clean the DJI AGRAS T40/T20P agricultural drone to maintain its performance and prevent any residue from causing damage. Here are the steps to clean the drone:
1. Fill the spray tank with clean water or soapy water and spray the water through the sprinklers until the tank is empty. Repeat this step two more times.
2. Remove the spray tank strainer and sprinklers and clean them thoroughly. You can immerse them in clean water for 12 hours to ensure they are properly cleaned.
3. Clean the aircraft body by using a spray washer filled with water. Make sure to wipe the surface with a soft brush or wet cloth to remove any dirt or residue. Afterwards, use a dry cloth to remove any water residue.
4. If there is any dust or pesticide liquid on the motors, propellers, or heat sinks, wipe them with a wet cloth and then use a dry cloth to remove any remaining water residue.
5. Store the cleaned aircraft in a dry environment to prevent any moisture damage.
It is important to follow these cleaning steps to ensure the longevity and proper functioning of the DJI AGRAS T40/T20P agricultural drone. For more detailed instructions and maintenance guidelines, refer to the user manual provided by DJI.
Add New Comment