User Manual Q&AAnswer
Feb 25, 2025 - 05:26 AM
To charge the MOB MO9231 A5 Portfolio with Power Bank, follow these steps:
1. Connect the charging station to a USB power supply using the cable provided.
2. The blue indicator light on the power bank will start flashing, indicating that charging is in progress.
3. The indicator lights will remain permanently lit when the power bank is fully charged.
Please note that you can only charge one device at a time using this power bank, and the charging times will vary depending on the device.
To check the battery capacity of the power bank, press the button on the power bank. The blue LED lights will indicate the remaining battery capacity as follows:
- 4 lights = 100%
- 3 lights = 75%
- 2 lights = 50%
- 1 light = 25%
It is important to use the charging cables and connectors provided by the authorized maker when connecting the power bank to your device. Using cables or connectors from unauthorized makers may cause severe or fatal injuries, property loss, and damage to the product and the device.
The power bank is compatible with Apple® Products USB Cable/adapter (not included). If the product does not start charging when connected to the device, try disconnecting all cables and trying again.
Please ensure that the power bank is used in a dry location only and is not exposed to water. It should also not be exposed to high temperatures or direct sunlight to prevent overheating of the batteries.
For safety reasons, do not open or disassemble the product. If the batteries are exhausted, remove them from the equipment and dispose of them through approved outlets. After fully charging the power bank, remember to remove the power source.
Keep the product out of reach of children and do not leave it unattended while in use.
For more detailed information and compliance with EU regulations, you can refer to the EU declaration of conformity available at www.momanual.com.
Add New Comment