User Manual Q&AAnswer
Feb 25, 2025 - 05:07 AM
To change the batteries in the VIOTEL Viot00571 Accelerometer Vibration Node, please follow these steps:
1. Ensure that the node is in Deep Sleep mode.
2. Using a T10 Torx Screwdriver, unscrew the four bolts on the front of the node's enclosure until they are loose. Note that the bolts are designed to remain in the device section.
3. Flip over the top half of the enclosure to expose the battery pack. Use two fingers to firmly pull up on the battery, and it should pop out of its holder. Be careful not to pull or rip the red and black cables attached to the battery pack.
4. Gently pull out the exposed plug connecting the battery to the device. Dispose of the used battery pack correctly according to legislative requirements.
5. Insert the new battery pack's plug into the device's socket. You may need to use thin needle nose pliers to ensure it is adequately plugged in.
6. Slide the battery pack into position and push firmly until it clicks into place.
7. Once the device is screwed back into the base, you can safely turn the node back to Awake mode for use.
Please refer to the VIOTEL Viot00571 Accelerometer Vibration Node User Manual for more detailed instructions and illustrations.
Add New Comment