User Manual Q&AAnswer
Feb 25, 2025 - 05:01 AM
To charge the PNi ADVF80 Adventure F80 Dual LED flashlight, you will need to use the provided USB Type C cable. Here are the steps to charge the flashlight:
1. Locate the USB Type C port on the flashlight. It is usually located on the side or bottom of the flashlight.
2. Connect one end of the USB Type C cable to the USB port on a power source, such as a computer, wall adapter, or power bank.
3. Insert the other end of the USB Type C cable into the USB Type C port on the flashlight.
4. The flashlight's LED indicator will usually turn on to indicate that it is charging. The LED indicator may be located near the button or on the side of the flashlight.
5. Allow the flashlight to charge until the LED indicator turns off or changes color, indicating that the battery is fully charged. The charging time may vary depending on the remaining battery capacity.
6. Once the battery is fully charged, disconnect the USB Type C cable from both the flashlight and the power source.
It is important to use the correct battery and follow the charging instructions provided in the user manual to ensure safe and proper charging of the flashlight.
Add New Comment