User Manual Q&AAnswer
Feb 25, 2025 - 05:00 AM
To properly fit and adjust the ResMed AirTouch N20 CPAP Nasal Mask, follow these steps:
1. Twist and pull both magnetic clips away from the frame.
2. With both lower headgear straps released, hold the mask against your face.
3. Pull the headgear over your head, ensuring that the ResMed logo on the headgear is facing up.
4. Bring the lower straps below your ears and attach the magnetic clip to the frame.
5. Undo the fastening tabs on the upper headgear straps.
6. Adjust the straps evenly until the mask sits comfortably just over your nose.
7. Undo the fastening tabs on the lower headgear straps.
8. Adjust the straps evenly until the mask is stable.
9. Reattach the fastening tabs.
10. Connect the air tube on the device to the short tube.
11. Attach the elbow to the mask. First, press the elbow’s side buttons, and then push the elbow into the mask, ensuring it clicks in on both sides.
12. Start the device.
For further instructions and complete labeling information, including indications, contraindications, warnings, and precautions, refer to the user guide provided with the ResMed AirTouch N20 CPAP Nasal Mask.
Add New Comment