User Manual Q&AAnswer
Feb 25, 2025 - 04:32 AM
To connect the XPOWER FM-88W Misting Fan to a water source, you have two options depending on the model:
1. For Model FM-68: xxxx the water faucet adapter onto the water faucet. Turn the switch to the desired position to open or close the valve. Turn on the water faucet.
2. For Model FM-68W and FM-88W: The misting fan must connect to a container with water as a source. You can choose your own container or use the XPOWER Water Tank for fast and convenient connection.
- Connect to a Bucket:
a. Put the end of the pumping hose into a bucket.
b. Put the unit onto the bucket.
c. The bucket must have an upper diameter less than 11.8 inches.
- Connect to WT Series:
a. Put the end of the pumping hose through a small hole into the WT Series.
b. Put the hose into the slot of the WT Series.
Please note that for Model FM-68, you will need to use the water faucet adapter, while for Model FM-68W and FM-88W, you will need to use a bucket or the WT Series for water supply.
Add New Comment