User Manual Q&AAnswer
Feb 25, 2025 - 04:20 AM
To install the SIM card in the Skroutz GPS Tracker K40 Smartwatch, follow these steps:
1. Locate the SIM card tray on the watch. It is usually on the side or back of the watch.
2. Place the nano SIM card on the SIM card tray with the golden chip facing up and the angled side facing out.
3. After installing the SIM card, turn on the watch and check the signal grid of the SIM card on the status bar of the watch.
4. If you can see the signal grid of the SIM card on the status bar, it means that you have successfully installed the SIM card.
5. If you can see the up and down arrows on the signal grid, it means that your SIM card has an internet connection. If there are no up and down arrows, you may need to set up the APN via SMS command.
Note: Make sure to xxxx on the screws at this time to prevent water from entering the watch.
Add New Comment