User Manual Q&AAnswer
Feb 25, 2025 - 04:19 AM
To install the FAKRO LXH-A Attic Metal Handle, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Ensure that you have all the necessary tools and materials required for installation.
2. Identify the location where you want to install the handle. It should be within reach and easily accessible.
3. Attach the construction connectors to the floor. These connectors should be intended for the specific substrate and have a minimum pull-out load of 2.5 kN.
4. Place the handle on top of the connectors and align it properly.
5. Use the provided screws to secure the handle to the connectors. Make sure to tighten them securely.
6. Test the handle by applying pressure to ensure it is securely installed and can support the intended weight.
Please note that it is important to strictly follow the installation instructions provided in the manual. Failure to do so may result in improper installation, which can lead to serious injury or damage. If you have any doubts or concerns, it is recommended to consult a professional or contact the manufacturer for further assistance.
Add New Comment