User Manual Q&AAnswer
Feb 25, 2025 - 03:41 AM
To charge the Milwaukee MXFPS-0 MX FUEL Power Supply, follow these steps:
1. Align the battery pack with the bay on the charger and slide the battery pack into the charger as far as possible.
2. When the battery pack is inserted into the charger, the LEDs on the charger will indicate the charging status. Continuous red light means the battery is charging, continuous green light means the charging is complete.
3. If the battery pack is too hot or too cold, the LEDs will flash red. Charging will begin when the battery reaches the correct charging temperature.
4. The next battery pack inserted in the charger will start charging when the previous pack is fully charged.
5. A fully discharged battery pack with a normal temperature will charge in about 45 to 90 minutes, depending on the battery pack and the internal temperature of the charger.
6. Once the charging is complete, the continuous green light will come on.
7. The charger will keep the battery pack fully charged if it is left on the charger.
Please note that it is important to use only MILWAUKEE MX FUEL Lithium-Ion batteries in this charger. Using other types of batteries may cause personal injury and damage.
Add New Comment