User Manual Q&AAnswer
Feb 25, 2025 - 03:31 AM
To connect your iPad to the Roland V-160HD using the V-160HD Remote app, you have three options: Bluetooth, USB, or wireless LAN (Wi-Fi). Here are the steps for each method:
1. Bluetooth Connection:
- On the V-160HD, press the [MENU] button, navigate to "SYSTEM," then "Bluetooth," and set "REC CONTROL" to "ON" to turn on the V-160HD's Bluetooth function.
- On your iPad, go to the Settings menu and turn on Bluetooth.
- Launch the V-160HD Remote app on your iPad.
- Tap the CONNECT [SETUP] button in the app.
- Tap the [Bluetooth] button.
- Tap the [Bluetooth MIDI Device] button and select "Roland V-160HD" from the list.
- If prompted with a "Bluetooth Pairing Request" dialog box, tap "Pair."
- Tap the box in STEP 3 and select "Roland V-160HD (Bluetooth)" from the list.
- Tap the [CONNECT] button. When the status icon changes to "Bluetooth," the device is connected.
2. USB Connection:
- Connect your iPad to the USB STREAM port on the V-160HD using a USB cable.
- Power on the V-160HD.
- Turn on your iPad and launch the V-160HD Remote app.
- Tap the CONNECT [SETUP] button in the app.
- Tap the [USB] button. When the status icon changes to "USB," the device is connected.
3. Wireless LAN (Wi-Fi) Connection:
- Connect the V-160HD and your wireless LAN master device using a LAN cable.
- Refer to the Owner's Manual of the wireless LAN master device for instructions on how to use it.
- Turn on the wireless LAN master device and enable DHCP server functionality.
- Power on the V-160HD.
- On the V-160HD, press the [MENU] button, navigate to "LAN CONTROL," set "CONFIGURE" to "USING DHCP," and press the [VALUE] xxxx .
- Set a network password using the [VALUE] xxxx .
- Use the [VALUE] xxxx to select "SAVE" and press the [VALUE] xxxx .
- Connect your iPad to the wireless LAN master device via Wi-Fi.
- Turn on Wi-Fi in the iPad's Settings menu.
- From the list of networks, select the wireless LAN master device to which the V-160HD is connected.
- Enter the password listed on the wireless LAN master device and tap "Connect."
- Launch the V-160HD Remote app on your iPad.
- Tap the CONNECT [SETUP] button in the app.
- Tap the [LAN] button. When the status icon changes to "LAN," the device is connected.
Please note that these instructions are based on the information provided in the Roland V-160HD Remote iPad App User Guide. Make sure to update your V-160HD system program to the latest version and refer to the manual for any specific requirements or troubleshooting steps.
Add New Comment