User Manual Q&AAnswer
Feb 25, 2025 - 03:30 AM
To set up the Rollei 28585 Lumis Bi-Color Ring Light for the Desk, please follow these steps:
1. Unfold the legs of the tripod by turning the tripod leg locking xxxx in the opposite direction. Adjust the legs to the desired position and then tighten the locking xxxx .
2. Mount the ring light on the 1/4 inch xxxx of the tripod plate at the upper end of the tripod.
3. Adjust the height of the ring light by opening the adjustment clamps on the tripod and pulling the tripod to the desired height. Then close the adjustment clamps to secure the height.
4. xxxx the smartphone holder into the 1/4 inch thread inside the cold shoe connection of the ring light.
5. Connect the Rollei 28585 Lumis Bi-Color Ring Light to a USB-A power supply with an output of 5V 2A. You can connect it to a computer or a USB power supply unit (not included).
Once the setup is complete, you can turn on the ring light using the on/off switch on the remote control cable. You can adjust the brightness using the arrow buttons on the remote control, and choose between three color temperatures (3,200K, 4,500K, and 5,500K) using the mode button.
Please refer to the user manual for more detailed instructions and safety information.
Add New Comment