User Manual Q&AAnswer
Feb 25, 2025 - 03:28 AM
To switch between TX mode and RX mode on the NINGBO CSTAR Transmitter, follow these steps:
1. Locate the mode switch on the transmitter. It is labeled as "TX/RX Mode switch."
2. Slide the mode switch to the desired mode. If you want to use the transmitter as a transmitter (TX mode), slide the switch to the TX position. If you want to use it as a receiver (RX mode), slide the switch to the RX position.
Please note that when using the transmitter in TX mode, you need to connect it to an audio source device with a 3.5mm audio connector output. In RX mode, you need to connect it to a speaker with a 3.5mm audio connector input.
Remember to follow the instructions in the user manual for pairing the transmitter with your wireless speaker or earbuds in TX mode or your mobile device in RX mode. The LED indicator on the transmitter will provide visual cues to indicate successful pairing.
If you have any further questions or need more detailed instructions, please refer to the user manual provided with the NINGBO CSTAR Transmitter.
Add New Comment