User Manual Q&AAnswer
Feb 25, 2025 - 03:27 AM
To assemble the Goldair GSTF180 80cm Tower Fan, please follow these steps:
1. Start by loosening the base locking nut located at the bottom of the unit. Turn it anticlockwise and push it down the length of the power cord.
2. Run the power cord through the central gap between the two halves of the unassembled base.
3. Connect the two halves of the base by pushing the plastic pegs on each half into the corresponding slots on the other half.
4. Align the tower fan onto the base. Make sure that the power cord passes through the guides on the rear half of the base.
5. Pull up the base locking nut and tighten it clockwise.
6. Route the power cord through the cord slot at the rim of the base plate, ensuring that the cord sits flush with the base plate rim to provide an even surface when positioning the fan assembly upright.
Please refer to the instruction manual for visual illustrations and further details on the assembly process.
Add New Comment