Answer

Feb 25, 2025 - 03:23 AM
To change the filters on the TROTEC TAC 5000 Professional Air Cleaner, follow these steps:
1. Switch off the device and unplug it from the power source.
2. Open the sliding covers by pulling them outwards with a jerk and sliding them apart.
3. Pull out the tensioning frame towards the top.
4. Remove the pre-filter box by pulling it out of the device in an upward motion and remove the filters from the box.
5. If necessary, loosen the clasp and the locking lever on the filter boxes.
6. Disconnect the air hoses from the measuring points.
7. Move the main filter box a little sideways.
8. Pull the main filter box out of the device in an upward motion and remove the filters from the box.
9. Replace the filters with new ones according to the desired filter combination and field of application.
10. Assemble the filter boxes in reverse order, making sure to connect the air hoses to the correct measuring points.
11. Close the sliding covers by pushing them together until they lock in place.
12. Tilt the stacking handles up and lock them in place.
Please refer to the TROTEC TAC 5000 Professional Air Cleaner instructions for more detailed information and illustrations on how to change the filters.
Add New Comment