User Manual Q&AAnswer
Feb 25, 2025 - 03:19 AM
To install the INVACARE TRD0585 PS CUSHION Reversible Infection Control Cover, follow these steps:
1. Remove all packaging before installation.
2. If applicable, ensure the desired fabric surface of the outer cover is exposed.
3. Orient the cushion so that the waterfall edge is facing the front of the wheelchair and the hook and loop strips are facing down.
4. Align the loop strips on the bottom of the cushion with the corresponding hook strips on the wheelchair seat.
5. In the event that the wheelchair seat and PS Cushion have matching loop strips, install the four double hook strips (provided separately) at each of the intersection points on the wheelchair seat to secure the cushion in place.
6. Position the cushion onto the wheelchair as far back as possible.
7. Press down firmly to ensure the hook and loop strips are fully engaged.
Note: If you want to reverse the outer cover, follow the instructions provided in the manual for the specific fabric type.
It is important to read the user manual carefully and follow the instructions provided for proper installation and use of the INVACARE TRD0585 PS CUSHION Reversible Infection Control Cover.
Add New Comment