User Manual Q&AAnswer
Feb 25, 2025 - 02:57 AM
To assemble the Einhell GC-PM 46/3 Petrol Lawn Mower, follow these steps:
1. Fit the lower and upper push bar (Item 3) as shown in Fig. 3a-3b. Choose a hole to fasten the push bar at the desired height. Make sure the height is set the same on both sides.
2. Insert the grip of the starter cable (Item 9a) into the hook provided for that purpose as shown in Fig. 3c.
3. Fasten the actuator cables to the push bar with the supplied cable clips (Item 10) as shown in Fig. 3d.
4. Lift the ejector flap (Item 5a) with one hand and hook in the grass bag (Item 4a) as shown in Fig. 4a.
Once you have assembled the lawn mower, you can proceed with adding oil and fuel before starting the engine. Please refer to the instruction manual for more detailed information on operating and maintaining the Einhell GC-PM 46/3 Petrol Lawn Mower.
Add New Comment