User Manual Q&AAnswer
Feb 25, 2025 - 02:52 AM
To connect the KVM-tec 4K DP 1.2 Redundant And Uncompressed Extender, follow these steps:
1. Connect the CON/Remote and the CPU/Local Unit with the supplied 12V 2A power supply.
2. Connect the USB cable to a USB socket of your PC and connect the other end of the USB cable to the Local Unit. Connect the keyboard and mouse to the Remote Unit.
3. Connect the Local and the Remote Unit with a network fiber cable.
4. Connect the DP cable from the PC to the DP/in socket of the Local device and connect the screen on the remote side with the DP cable.
5. Connect the Audio cable from the PC to the Local Extender and connect the Audio cable from the Remote Extender to the speaker.
6. Connect the Audio Cable from the Microphone to the Remote Extender and connect the Audio cable from the Local Extender to the PC.
Please note that the recommended length of the display port cable should be a maximum of 1.8m (5.9 ft) to ensure interference-free 4K transmission.
For more detailed instructions and information, please refer to the KVM-tec 4K DP 1.2 Redundant And Uncompressed User Manual.
Add New Comment