User Manual Q&AAnswer
Feb 25, 2025 - 02:51 AM
To adjust the unbalances on the NetterVibration NED 605 Electric External Vibrators, follow these steps:
1. Switch off the NED at the main switch and ensure that there is no voltage.
2. Loosen both unbalance covers.
3. Loosen the locking nuts or locking screws.
4. Bring the unbalances to the desired setting according to the instructions provided in the manual. The unbalances may be adjusted by removing or turning the unbalance discs.
5. Retighten the locking nuts or locking screws to the recommended tightening torque.
6. Fasten both covers for the unbalances.
It is important to note that the unbalances must be set mirror-symmetrically. The manual provides specific instructions for adjusting the unbalances based on the type of unbalance discs used in the NED model.
Please refer to the manual for detailed instructions and illustrations on how to adjust the unbalances for your specific NED model.
Add New Comment