User Manual Q&AAnswer
Feb 25, 2025 - 02:40 AM
To switch between different input sources on the TouchView Interactive TV-WP-HDUSB-KIT 4K HDBaseT 2.0 Extender, you can use the SOURCE SELECT button on the front panel of the transmitter. Press the button to select the next input source, and the corresponding input LED will turn green to indicate the selected source. If you want to enable auto-switching mode, press and hold the SOURCE SELECT button for at least 3 seconds. In auto-switching mode, the extender will automatically switch to a new input source when it is detected. If the current display signal is removed or the device is rebooted, the extender will switch to another active HDMI input. To exit auto-switching mode, press and hold the SOURCE SELECT button again.
Add New Comment