User Manual Q&AAnswer
Feb 25, 2025 - 02:34 AM
To program the LV50 Series Intelligent Switching Valve, follow these steps:
1. Press the "EDIT" key to enter the item edit selection interface.
2. Use the "PAGE" key/up key/down key to select the member object you want to edit.
3. Press the left/right key to switch to the basic parameter editing state of the current item.
4. Use the up key/down key/rotary encoder to modify the corresponding parameters, such as port No., hour, minute, and second.
5. Press the "ENTER" key to save the changes and return to the item editing interface.
6. Continue editing other items by using the "Page key/up key/down key/Rotary encoder".
7. Once all items are edited, press the "ENTER" key in the item editing interface to return to the main interface. The editing parameters of all items will be saved in the ferroelectric memory.
Note: If you press the "HOME" key to return to the main interface after editing all items, the editing parameters will only be saved in the RAM memory area. To save the parameters in the ferroelectric or FLASH memory, you need to perform specific functions like "Store the latest factory settings" or "Restore the latest factory settings" as described in the manual.
For more detailed instructions and information, please refer to the "Edit Operation" section in the RUNZE FLUID LV50 Series Intelligent Switching Valve Instruction Manual.
Add New Comment