User Manual Q&AAnswer
Feb 25, 2025 - 02:25 AM
To connect the OLIGHT Obulb Pro to the app, follow these steps:
1. Set the Obulb Pro to its network setting mode. While the Obulb Pro is turned on with the white light setting, press and hold its button for 5 seconds until it flashes red and then green.
2. Enable the Bluetooth and GPS functions on your mobile phone and launch the OLIGHT APP.
3. Search and add the Obulb Pro by tapping "Add New Device" in the app and selecting the MAC address of the Obulb Pro. Tap "OK" to add it.
4. Once added, the Obulb Pro will appear in the "My Device" list in the app. You can turn it on/off by tapping the control slider or access the control panel by tapping the device entry.
Note: If the Obulb Pro has not been connected within 3 minutes, it will exit the network setting mode automatically. You can also exit the mode with any button operation on the Obulb Pro.
If you want to control the Obulb Pro with another mobile phone, you can share your current network data by generating a QR Code with the OLIGHT APP. Alternatively, you can disconnect the Obulb Pro and use another device to search and add it.
Add New Comment