User Manual Q&AAnswer
Feb 25, 2025 - 01:46 AM
To reset the GIANNI CP-43BZ-LB Series Buzzer and Backlight Resettable Call Point, you can follow the steps outlined in the instruction manual. Here is a complete answer supported by the manual:
1. Locate the reset key included with the call point. The reset key is used to reset the call point after it has been activated.
2. Insert the reset key into the reset hole on the call point. The reset hole is typically located near the bottom of the call point.
3. Press and hold the reset key for a few seconds until you hear a click or see the backlight change color. This indicates that the call point has been successfully reset.
4. Release the reset key and remove it from the reset hole.
5. The call point is now reset and ready for use again.
Please note that the specific location of the reset hole and the exact procedure may vary slightly depending on the model and version of the GIANNI CP-43BZ-LB Series Buzzer and Backlight Resettable Call Point. It is always recommended to refer to the instruction manual provided with the product for the most accurate and up-to-date information.
Add New Comment