Answer

Feb 25, 2025 - 01:45 AM
To assemble and install the attachments on the KENWOOD KHH326WH-INT MultiOne Stand Mixer, please follow these steps:
1. Ensure that the stand mixer is turned off and unplugged from the power source before starting the assembly process.
2. Attach the bowl: Place the bowl onto the stand mixer base and rotate it clockwise until it locks into place. The bowl should sit securely on the base.
3. Attach the splashguard (if included): If your stand mixer comes with a splashguard, align the tabs on the splashguard with the slots on the bowl. Press down firmly until the splashguard is securely attached.
4. Attach the desired attachment: The KENWOOD KHH326WH-INT MultiOne Stand Mixer comes with various attachments such as a dough hook, K-beater, and whisk. Choose the desired attachment based on your recipe requirements.
- Dough hook: Insert the dough hook into the attachment outlet located at the front of the stand mixer. Rotate the attachment clockwise until it locks into place.
- K-beater: Insert the K-beater into the attachment outlet located at the front of the stand mixer. Rotate the attachment clockwise until it locks into place.
- Whisk: Insert the whisk into the attachment outlet located at the front of the stand mixer. Rotate the attachment clockwise until it locks into place.
5. Secure the attachment: Once the attachment is inserted, push it up firmly to ensure it is securely attached to the stand mixer.
6. Connect the power cord: Plug the power cord into a suitable power outlet.
7. You are now ready to use your KENWOOD KHH326WH-INT MultiOne Stand Mixer with the desired attachment.
For more detailed instructions and illustrations, please refer to the "Installation Instruction" section of the KENWOOD KHH326WH-INT MultiOne Stand Mixer Instruction Manual.
Add New Comment