Answer

Feb 25, 2025 - 01:41 AM
To install the Lucci 209030 Reef 200mm Round Exhaust Fan in White, please follow these steps:
1. Ensure that a licensed electrician is available to install the unit to the mains supply.
2. Check if the installation location in the ceiling has access to a socket outlet connected to a wall switch. If not, contact a licensed electrician to arrange installation of the socket outlet and wall switch.
3. Adhere to local council regulations and the latest local and national wiring rules during wiring and installation. If unsure, consult a licensed electrician.
4. Make sure the product is earthed as it is a Class I product.
5. This product is suitable for indoor use only.
6. Install the exhaust fan at least 2.1 meters above the floor level.
7. Before cutting a hole in the ceiling, check for ceiling joists, electrical wiring, or any obstructions above the desired mounting location.
8. The mounting point must be able to support at least twice the weight of the product.
9. Do not install the exhaust fan in canopies over stoves or areas with excessive heat.
10. This product is designed for installation in a flat ceiling only, not on a sloping ceiling or vertical wall.
11. If using a duct (not included), install it horizontally in the ceiling and at the same height or lower than the exhaust fan. Ensure the duct is not bent to maintain performance.
12. Take precautions to avoid back-flow of gases from open flues of gas or other fuel-burning appliances.
13. Do not allow thermal insulation to cover any part of the rear of the appliance, and ensure it does not obstruct airflow.
14. Provide an adequate source of external air to ensure the rated performance.
For detailed installation instructions, please refer to the instruction manual provided with the product.
Add New Comment